MAX3221ECDBRG4 vs MAX3221IDBR Comparison

Detailed side-by-side comparison of MAX3221ECDBRG4 by Texas Instruments and MAX3221IDBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
MAX3221ECDBRG4 MAX3221ECDBRG4 - 3V-5.5V Single RS-232 Transceiver | TI

MAX3221ECDBRG4 - 3V-5.5V Single RS-232 Transceiver | TI

MAX3221ECDBRG4 ✓ Active
Texas Instruments
MAX3221IDBR MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments

MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments

MAX3221IDBR ✓ Active

Specification Comparison

Parameter MAX3221ECDBRG4 MAX3221IDBR
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type Single-channel RS-232 line driver and receiver Single-channel RS-232 line driver and receiver
Number of Drivers 1 driver 1
Number of Receivers 1 receiver 1
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Interface Standard RS-232; TIA/EIA-232-F compliant —
Human-Body-Model ESD Protection ±15 kV —
IEC 61000-4-2 Contact Discharge ±8 kV —
IEC 61000-4-2 Air-Gap Discharge ±15 kV —
External Charge-Pump Capacitors 4 × 0.1 µF 4 × 0.1 µF
Package 16-SSOP, 5.30 mm width 16-pin SSOP
Mounting Type Surface mount Surface mount
Packaging Digi-Reel —
Operating Temperature 0 °C to +70 °C —
Lead-Free Status Lead-free —
Green Product Status Green product —
Data Transmission Rate [DATA_NEEDED: data transmission rate] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Supply Current [DATA_NEEDED: supply current] —
Automatic Shutdown [DATA_NEEDED: automatic shutdown and wake-up behavior] —
RoHS Status [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] [DATA_NEEDED: REACH status]
Maximum Data Rate — 250 kbps
ESD Protection — ±15 kV HBM on serial-port connection pins, including GND
Typical Standby Current — 1 µA
Receiver Enable Control — 1 dedicated enable input
Logic Input Compatibility — Accepts 5 V logic input with 3.3 V supply
RS-232 Compliance — TIA/EIA-232-F and ITU V.28
Charge-Pump Architecture — Dual charge-pump circuit
Operating Temperature Range — [DATA_NEEDED: operating temperature range]

Datasheets & Resources

Browse All Products Create BOM Request Quote