MAX338CSE+ vs MAX338ESE+T Comparison
Detailed side-by-side comparison of MAX338CSE+ by Maxim Integrated and MAX338ESE+T by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MAX338CSE+ | MAX338ESE+T |
|---|---|---|
| Brand | Maxim Integrated | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | 8:1 analog multiplexer (or dual 4:1) | — |
| Number of Channels | 8 single-ended or 2x4 differential | 8 channels |
| On-State Resistance (RON) | 400 ohm (max 650 ohm over signal) | — |
| Single Supply Voltage | +4.5 V to +30 V | — |
| Dual Supply Voltage | +/-4.5 V to +/-20 V | — |
| Logic Compatibility | TTL/CMOS compatible | — |
| Channel Leakage | Low-leakage CMOS, ~ nA typical | — |
| Switching Action | Break-before-make | — |
| Address Lines | 3-bit binary (A0, A1, A2) | — |
| Enable Input | Active-low EN | — |
| On Time (tON) | [DATA_NEEDED: ON switching time] | — |
| Off Time (tOFF) | [DATA_NEEDED: OFF switching time] | — |
| Operating Temperature | 0 C to +70 C (commercial) | — |
| Package | 16-pin Narrow SOIC (NSOIC) | 16-SOIC |
| Mounting Type | Surface Mount | — |
| RoHS Status | Compliant (Pb-free suffix '+') | [DATA_NEEDED: RoHS status] |
| ESD Protection | Yes (per datasheet) | — |
| Multiplexer Configuration | — | 8:1 |
| Number of Circuits | — | 1 circuit |
| On-State Resistance | — | 400 ohm |
| Single Supply Voltage Range | — | +4.5 V to +30 V |
| Dual Supply Voltage Range | — | ±4.5 V to ±20 V |
| Address Control | — | 3-bit binary |
| TTL-Compatible Control Threshold | — | +0.8 V to +2.4 V |
| Process Technology | — | 44 V silicon-gate CMOS |
| Package Width | — | 3.90 mm |
| Delivery Format | — | Tape and reel |
| Multiplexer or Demultiplexer Operation | — | Configurable by signal-routing arrangement |
| Pin-Configurable Replacement Reference | — | DG508A and DG509A industry-standard devices |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Channel Leakage Current | — | [DATA_NEEDED: channel leakage current] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Off Isolation | — | [DATA_NEEDED: off isolation] |