MAX485CSA+T vs MAX485ESA+ Comparison
Detailed side-by-side comparison of MAX485CSA+T by Maxim Integrated and MAX485ESA+ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MAX485CSA+T | MAX485ESA+ |
|---|---|---|
| Brand | Maxim Integrated | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | 1-channel half-duplex RS-485/RS-422 transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Maximum Data Rate | 2.5Mbps | — |
| Minimum Supply Voltage | 4.75V | — |
| Maximum Supply Voltage | 5.25V | — |
| Nominal Supply Voltage | 5V | — |
| Operating Temperature Range | 0°C to 70°C | — |
| Package | 8-pin NSOIC/SOIC | 8-SOIC (SOIC-8) |
| Mounting Type | Surface mount | Surface Mount |
| Duplex Mode | Half duplex | — |
| Driver Short-Circuit Protection | Current limited with thermal shutdown | — |
| Receiver Output | Logic-level differential receiver output | — |
| Ordering Configuration | +T tape-and-reel configuration | — |
| RoHS Status | unknown | Compliant (per Maxim/ADI datasheet suffix '+') |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Function | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Supply Voltage | — | 4.75 V to 5.25 V (5 V nominal) |
| Data Rate | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Operating Temperature | — | -40 °C to +85 °C |