MCP2551-E-SN vs SN65HVD230DR Comparison
Detailed side-by-side comparison of MCP2551-E-SN by Microchip Technology and SN65HVD230DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Microchip Technology
MCP2551-E/SN - High-Speed CAN Transceiver 1Mbps SOIC-8 | Microchip
MCP2551-E-SN ✓ ActiveTexas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | MCP2551-E-SN | SN65HVD230DR |
|---|---|---|
| Brand | Microchip Technology | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.98 | $0.94 |
| Function | CAN Transceiver | — |
| Protocol | ISO-11898 (CAN, CAN-FD ready) | CANbus (ISO 11898-2) |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 1 Mbps | — |
| Supply Voltage (VCC) | 4.5 V to 5.5 V | — |
| Supply Current (Normal Mode, Recessive) | 10 mA typical | — |
| Supply Current (Standby Mode) | [DATA_NEEDED: standby supply current] | — |
| Bus Fault Voltage (CANH, CANL) | -40 V to +40 V | — |
| Load Dump Voltage | ISO-7637 compliant | — |
| Operating Temperature Range | -40 C to +125 C (E = Extended) | — |
| Package | 8-SOIC (SN), 3.90 mm body width | 8-SOIC (D) |
| Mounting Type | Surface Mount | Surface Mount |
| ESD Protection | [DATA_NEEDED: HBM/CDM ESD rating] | — |
| MSL Level | 1 | — |
| RoHS Status | Compliant | Compliant |
| Product Type | — | CAN Bus Transceiver |
| Supply Voltage | — | 3 V to 3.6 V (3.3 V nominal) |
| Maximum Data Rate | — | 1 Mbps |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Operating Temperature | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |