MK60DN512VMD10 vs MK64FN1M0VLL12 Comparison
Detailed side-by-side comparison of MK60DN512VMD10 by NXP Semiconductors and MK64FN1M0VLL12 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VMD10 ✓ ActiveNXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ ActiveSpecification Comparison
| Parameter | MK60DN512VMD10 | MK64FN1M0VLL12 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $8.12 | $7.95 |
| Core Architecture | ARM Cortex-M4 with FPU and DSP | — |
| Core Bit Width | 32-bit | — |
| Maximum Clock Frequency | 100 MHz | — |
| Program Flash Memory | 512 KB (512K x 8) | — |
| SRAM | 128 KB | — |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| I/O Pins | 66 | — |
| Package | 144-MAPBGA (13 x 13 mm) | — |
| Mounting Type | Surface Mount (BGA) | Surface Mount |
| Operating Temperature Range | -40 C to +105 C | -40 C to +105 C (industrial) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 PTP hardware | — |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG | — |
| ADC | Two 16-bit SAR ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) |
| DAC | Two 12-bit DAC | 12-bit |
| Cryptography | Hardware encryption and tamper detection | — |
| MSL Level | 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| RoHS Status | Compliant | Compliant |
| Manufacturer | — | NXP Semiconductors |
| Series | — | Kinetis K64 |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP) |
| Core Size | — | 32-bit |
| Maximum CPU Frequency | — | 120 MHz |
| Program Memory Size | — | 1 MB (1M x 8) Flash |
| RAM Size | — | 256 KB SRAM |
| Flash Memory Type | — | FTFE - Non-Flex (4 KB sector, 8-byte phrase) |
| Supply Voltage (VDD) | — | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) |
| Package / Case | — | 100-LQFP, 14x14 mm, 0.5 mm pitch |
| USB | — | USB 2.0 Full-Speed OTG, on-chip FS transceiver |
| Ethernet | — | 10/100 Mbps MAC, MII / RMII interface |
| Hardware Cryptography | — | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG |
| GPIO | — | [DATA_NEEDED: GPIO count for this LQFP-100 mask] |
| Low-Power Modes | — | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention |