MMA7340LR1 vs MMA7360LR1 Comparison
Detailed side-by-side comparison of MMA7340LR1 by NXP Semiconductors and MMA7360LR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MMA7340LR1 | MMA7360LR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Motion Sensors | Motion Sensors |
| Lifecycle Status | Active | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.85 | $3.42 |
| Sensor Type | 3-Axis Capacitive MEMS Accelerometer | 3-Axis Capacitive MEMS Accelerometer |
| Acceleration Range | ±3g, ±11g (selectable via g-Select) | ±1.5g, ±6g (selectable via g-Select pin) |
| Output Type | Analog voltage (one VOUT per axis) | Analog, ratiometric (X, Y, Z) |
| Sensitivity (3g mode) | [DATA_NEEDED: 3g mode sensitivity mV/g] | — |
| Sensitivity (11g mode) | [DATA_NEEDED: 11g mode sensitivity mV/g] | — |
| Zero-g Offset (factory trimmed) | [DATA_NEEDED: zero-g offset V] | — |
| Bandwidth (X, Y axes) | 400 Hz | 400 Hz |
| Bandwidth (Z axis) | 300 Hz | 300 Hz |
| Filter | 1-pole low-pass | — |
| Self-Test | Yes (logic-level input) | — |
| Sleep Mode | Yes (logic-level input) | — |
| Supply Voltage | 2.2 V to 3.6 V (typical 3.3 V) | 2.2 V to 3.6 V |
| Supply Current (active) | [DATA_NEEDED: active supply current mA] | — |
| Supply Current (sleep) | [DATA_NEEDED: sleep supply current uA] | — |
| Operating Temperature | -40 C to +85 C | -40C to +85C |
| Package | 14-LGA (3 x 5 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant (Lead Free) |
| Lead-Free Status | Lead Free | — |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |