MP1720DH-216-LF-P vs MP1720DH-12-LF-P Comparison
Detailed side-by-side comparison of MP1720DH-216-LF-P by Monolithic Power Systems and MP1720DH-12-LF-P by Monolithic Power Systems. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Monolithic Power Systems
MP1720DH-216-LF-P - 2.7W Class D Audio Amplifier | MPS
MP1720DH-216-LF-P ✓ ActiveMonolithic Power Systems
MP1720DH-12-LF-P - 2.7W Class-D Mono Amplifier | MPS
MP1720DH-12-LF-P ✓ ActiveSpecification Comparison
| Parameter | MP1720DH-216-LF-P | MP1720DH-12-LF-P |
|---|---|---|
| Brand | Monolithic Power Systems | Monolithic Power Systems |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Mono Class D audio power amplifier | Mono Class-D audio amplifier |
| Output Configuration | 1 channel, full-bridge output | Full-bridge differential output |
| Rated Output Power | 2.7 W into 4 Ω | — |
| Distributor-Reported Output Power | 2.78 W | — |
| Supply Voltage Range | 2.5 V to 5.5 V | — |
| Maximum Efficiency | 90% | — |
| Output MOSFET Resistance | 250 mΩ at VIN = 3.3 V | — |
| Bandwidth | 20 kHz | — |
| Switching Frequency Options | 1 MHz or 1.3 MHz | — |
| External Clock Synchronization | Supported | — |
| Gain Configurations | Five fixed-gain options | — |
| Output LC Filter Requirement | No output LC filter required by the manufacturer EMI-reduction scheme | — |
| Startup and Shutdown Pop Suppression | Supported | — |
| Short-Circuit Protection | Supported | Supported |
| Thermal-Overload Protection | Supported | — |
| Operating Temperature Range | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Package | 10-MSOP-EP | 10-MSOP-EP |
| Mounting Type | Surface mount | Surface mount |
| Exposed Pad | Present | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Output Power | — | 2.7 W into 4 Ω |
| Efficiency | — | 90% |
| Integrated MOSFET On-Resistance | — | 250 mΩ at VIN = 3.3 V |
| Channel Count | — | 1 channel |
| EMI | — | Low EMI |
| Startup Pop Elimination | — | Supported |
| Shutdown Pop Elimination | — | Supported |
| Output Coupling Capacitor | — | Not required with full-bridge output |
| Supply Capacitor Recommendation | — | Low-voltage-coefficient tantalum or aluminum electrolytic; X7R ceramic preferred over Y5V or Z5U |
| Input Voltage Range | — | [DATA_NEEDED: input voltage range] |