MP3H6115A6U vs MPXH6115AC6T1 Comparison
Detailed side-by-side comparison of MP3H6115A6U by NXP Semiconductors and MPXH6115AC6T1 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ ActiveSpecification Comparison
| Parameter | MP3H6115A6U | MPXH6115AC6T1 |
|---|---|---|
| Brand | NXP Semiconductors | STMicroelectronics |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $4.85 | $5.85 |
| Sensor Type | Absolute pressure sensor | — |
| Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Supply Voltage | 3 V | — |
| Output Type | Analog, ratiometric | Analog, ratiometric |
| Output Voltage Range | 0.12 V to 2.8 V | — |
| Operating Pressure | 15 kPa ~ 115 kPa | — |
| Pressure Port | Male - 0.13 inch (3.3 mm) tube | Male 0.13" (3.3 mm) tube, top-side |
| Accuracy | High accuracy at high temperature (per datasheet) | 1.5% (over compensated temperature range) |
| Temperature Compensation | -40 C to +125 C | — |
| Technology | Piezoresistive (MEMS) with bipolar signal conditioning | — |
| Package | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width | — |
| Mounting Type | Surface Mount | Surface Mount |
| Signal Conditioning | On-chip bipolar op-amp and thin-film resistor network | — |
| Output Ratiometric | Yes (output proportional to VDD) | — |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C |
| Package Material | Durable thermoplastic (PPS) surface-mount package | — |
| RoHS Status | Compliant | Compliant |
| Pressure Type | — | Absolute |
| Operating Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0.2 V to 4.7 V (at VCC = 5.0 V) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Supply Current | — | [DATA_NEEDED: typical supply current] |
| Temperature Compensation Range | — | -40 C to +125 C |
| Package / Case | — | 8-SSOP (0.335", 8.50 mm width), Top Port |
| Media Compatibility | — | Dry gases (non-corrosive) |
| MSL Level | — | [DATA_NEEDED: MSL level] |