MPX2053GVP vs MPX2053GP Comparison
Detailed side-by-side comparison of MPX2053GVP by NXP Semiconductors and MPX2053GP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX2053GVP | MPX2053GP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.25 | $9.75 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 to 7.25 PSI (0 to 50 kPa) | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0 mV to 40 mV (at 10 V excitation) | — |
| Output Type | Wheatstone Bridge (analog mV) | Wheatstone Bridge (analog voltage, ratiometric) |
| Supply Voltage (Excitation) | 10 V to 16 V | — |
| Supply Current | [DATA_NEEDED: typical supply current] | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Port Style | Male, 0.19 inch (4.93 mm) Tube, Dual Port (top vented gauge) | — |
| Termination Style | PCB Through-Hole (4-SIP) | PC Pin (through-hole) |
| Package / Case | 4-SIP Top Port Module | — |
| Temperature Compensation | On-chip, calibrated | On-chip, calibrated |
| Offset (Zero Pressure) | 0 mV nominal | — |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Mounting Type | Through-Hole (SIP module) | Through-Hole |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Sensitivity | — | 0.8 mV/kPa typical |
| Full-Scale Output | — | 0 mV to 40 mV (at 10 V supply) |
| Supply Voltage | — | 10 V typical (16 V maximum) |
| Port Configuration | — | Single radial barbed port, 0.19" (4.93 mm) tube |
| Package | — | 4-SIP Module (Unibody-4) |
| Operating Temperature | — | 0°C to +85°C |
| Technology | — | Silicon piezoresistive (MEMS) |
| Linearity | — | [DATA_NEEDED: linearity %FS] |