MPX4115A vs MPX4100AP1 Comparison
Detailed side-by-side comparison of MPX4115A by NXP Semiconductors and MPX4100AP1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX4115A | MPX4100AP1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $8.20 | $9.10 |
| Sensor Type | Absolute Pressure Sensor | — |
| Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 20 kPa to 105 kPa (2.9 PSI to 15.23 PSI) |
| Output Type | Analog Voltage | Analog Voltage, Ratiometric |
| Output Voltage Range | 0.2 V to 4.8 V | 0.3 V to 4.9 V |
| Supply Voltage | 5.1 V typical | 5.0 V to 5.35 V (5.10 V nominal) |
| Accuracy | ±1.5% (0°C to +85°C) | — |
| Operating Temperature | -40°C to +125°C | -40 C to +125 C |
| Package | 6-SIP Module (Unibody) | 6-SIP Module (Case 867B-04) |
| Mounting Type | Through-Hole | Through-Hole |
| Port Type | Single port, axial | — |
| Media Compatibility | Dry air (non-corrosive gas) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Calibration | Factory calibrated, no external compensation required | — |
| MSL Level | 1 | — |
| RoHS Status | Compliant | Compliant |
| Pressure Type | — | Absolute (Manifold) |
| Sensitivity | — | 54 mV/kPa |
| Pressure Accuracy | — | +/-2.5% (0 C to 85 C) |
| Pressure Port | — | Male - 0.19 inch (4.93 mm) Tube |
| Response Time | — | 1.5 ms |
| Supply Current | — | [DATA_NEEDED: Supply current] |
| Packing / Min Order Quantity | — | Tray; Min Order Qty 200 (1K budgetary pricing) |