MPX4115A vs MPX4115A117 Comparison
Detailed side-by-side comparison of MPX4115A by NXP Semiconductors and MPX4115A117 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX4115A | MPX4115A117 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $8.20 | $10.90 |
| Sensor Type | Absolute Pressure Sensor | — |
| Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Output Type | Analog Voltage | Analog, Ratiometric Voltage |
| Output Voltage Range | 0.2 V to 4.8 V | 0.2 V to 4.8 V |
| Supply Voltage | 5.1 V typical | 4.85 V to 5.35 V (5 V typ) |
| Accuracy | ±1.5% (0°C to +85°C) | ±1.5% over 0°C to 85°C |
| Operating Temperature | -40°C to +125°C | -40 °C to +125 °C |
| Package | 6-SIP Module (Unibody) | — |
| Mounting Type | Through-Hole | Through-Hole |
| Port Type | Single port, axial | Single axial port, top side |
| Media Compatibility | Dry air (non-corrosive gas) | Dry air, non-corrosive gases |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp + thin-film network |
| Calibration | Factory calibrated, no external compensation required | — |
| MSL Level | 1 | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Pressure Type | — | Absolute |
| Operating Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Response Time | — | 1.0 ms (typical) |
| Package / Case | — | 6-SIP Module (Case 867-08) |
| Pin Count | — | 6 |