MPX4115A117 vs MPX4115A Comparison
Detailed side-by-side comparison of MPX4115A117 by NXP Semiconductors and MPX4115A by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX4115A117 | MPX4115A |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.90 | $8.20 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Output Type | Analog, Ratiometric Voltage | Analog Voltage |
| Output Voltage Range | 0.2 V to 4.8 V | 0.2 V to 4.8 V |
| Supply Voltage | 4.85 V to 5.35 V (5 V typ) | 5.1 V typical |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Accuracy | ±1.5% over 0°C to 85°C | ±1.5% (0°C to +85°C) |
| Operating Temperature | -40 °C to +125 °C | -40°C to +125°C |
| Response Time | 1.0 ms (typical) | — |
| Package / Case | 6-SIP Module (Case 867-08) | — |
| Port Type | Single axial port, top side | Single port, axial |
| Mounting Type | Through-Hole | Through-Hole |
| Media Compatibility | Dry air, non-corrosive gases | Dry air (non-corrosive gas) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | On-chip bipolar op-amp + thin-film resistor network |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| Pin Count | 6 | — |
| Sensor Type | — | Absolute Pressure Sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Package | — | 6-SIP Module (Unibody) |
| Calibration | — | Factory calibrated, no external compensation required |
| MSL Level | — | 1 |