MPX4115A117 vs MPX4115AP Comparison
Detailed side-by-side comparison of MPX4115A117 by NXP Semiconductors and MPX4115AP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX4115A117 | MPX4115AP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.90 | $12.03 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) |
| Output Type | Analog, Ratiometric Voltage | Analog Voltage (ratiometric) |
| Output Voltage Range | 0.2 V to 4.8 V | 0.20 V to 4.80 V |
| Supply Voltage | 4.85 V to 5.35 V (5 V typ) | 5.1 V typical (4.85 V to 5.35 V range) |
| Supply Current | [DATA_NEEDED: supply current] | 6 mA typical |
| Accuracy | ±1.5% over 0°C to 85°C | — |
| Operating Temperature | -40 °C to +125 °C | — |
| Response Time | 1.0 ms (typical) | — |
| Package / Case | 6-SIP Module (Case 867-08) | 6-SIP Module (Case 867B-04) |
| Port Type | Single axial port, top side | — |
| Mounting Type | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | On-chip bipolar op-amp + thin-film calibration resistors |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| Pin Count | 6 | — |
| Sensitivity | — | 45.9 mV/kPa |
| Linearity | — | 0.2% to 1.5% (depending on operating conditions) |
| Operating Temperature Range | — | -40 C to +125 C |
| Compensated Temperature Range | — | 0 C to +85 C |
| Pressure Port | — | Male - 0.19" (4.93 mm) Tube |
| Termination | — | Solder (SIP pins) |
| Min Order Quantity | — | 200 (per NXP product page) |
| Min Package Quantity | — | 20 (Tray) |