MPX4115A117 vs MPX4115AS Comparison
Detailed side-by-side comparison of MPX4115A117 by NXP Semiconductors and MPX4115AS by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPX4115AS - 15-115kPa Absolute Pressure Sensor | NXP Semiconductors
MPX4115AS ObsoleteSpecification Comparison
| Parameter | MPX4115A117 | MPX4115AS |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.90 | $9.95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Output Type | Analog, Ratiometric Voltage | Analog Voltage |
| Output Voltage Range | 0.2 V to 4.8 V | 0.2 V to 4.8 V |
| Supply Voltage | 4.85 V to 5.35 V (5 V typ) | 4.85 V to 5.35 V (5.1 V nominal) |
| Supply Current | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical quiescent current] |
| Accuracy | ±1.5% over 0°C to 85°C | — |
| Operating Temperature | -40 °C to +125 °C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Package / Case | 6-SIP Module (Case 867-08) | — |
| Port Type | Single axial port, top side | — |
| Mounting Type | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| Pin Count | 6 | — |
| Sensitivity | — | 45.9 mV/kPa (nominal at 5.1 V supply) |
| Port Style | — | Male - 0.19 inch (4.93 mm) Tube |
| Package Type | — | 6-SIP Module (through-hole) |
| Body Length/Diameter | — | 17.9 mm |
| On-Chip Signal Conditioning | — | Yes (bipolar op-amp) |
| Temperature Compensation | — | Yes (on-chip) |
| Factory Calibration | — | Yes (laser-trimmed) |