MPX4115AP vs MPX4115A Comparison

Detailed side-by-side comparison of MPX4115AP by NXP Semiconductors and MPX4115A by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPX4115AP MPX4115AP - 15-115 kPa Absolute Pressure Sensor | NXP | 6-SIP

MPX4115AP - 15-115 kPa Absolute Pressure Sensor | NXP | 6-SIP

MPX4115AP ✓ Active
NXP Semiconductors
MPX4115A MPX4115A - 15-115 kPa Absolute Pressure Sensor | NXP

MPX4115A - 15-115 kPa Absolute Pressure Sensor | NXP

MPX4115A ✓ Active

Specification Comparison

Parameter MPX4115AP MPX4115A
Brand NXP Semiconductors NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $12.03 $8.20
Pressure Type Absolute —
Operating Pressure Range 15 kPa to 115 kPa (2.18 psi to 16.68 psi) —
Sensitivity 45.9 mV/kPa —
Output Type Analog Voltage (ratiometric) Analog Voltage
Output Voltage Range 0.20 V to 4.80 V 0.2 V to 4.8 V
Supply Voltage 5.1 V typical (4.85 V to 5.35 V range) 5.1 V typical
Supply Current 6 mA typical —
Linearity 0.2% to 1.5% (depending on operating conditions) —
Operating Temperature Range -40 C to +125 C —
Compensated Temperature Range 0 C to +85 C —
Package / Case 6-SIP Module (Case 867B-04) —
Pressure Port Male - 0.19" (4.93 mm) Tube —
Mounting Type Through Hole Through-Hole
Termination Solder (SIP pins) —
Signal Conditioning On-chip bipolar op-amp + thin-film calibration resistors On-chip bipolar op-amp + thin-film resistor network
RoHS Status Compliant Compliant
Min Order Quantity 200 (per NXP product page) —
Min Package Quantity 20 (Tray) —
Sensor Type — Absolute Pressure Sensor
Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Accuracy — ±1.5% (0°C to +85°C)
Operating Temperature — -40°C to +125°C
Package — 6-SIP Module (Unibody)
Port Type — Single port, axial
Media Compatibility — Dry air (non-corrosive gas)
Calibration — Factory calibrated, no external compensation required
MSL Level — 1

Datasheets & Resources

Browse All Products Create BOM Request Quote