MPX4115AP vs MPX4115A117 Comparison
Detailed side-by-side comparison of MPX4115AP by NXP Semiconductors and MPX4115A117 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPX4115AP | MPX4115A117 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $12.03 | $10.90 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Sensitivity | 45.9 mV/kPa | — |
| Output Type | Analog Voltage (ratiometric) | Analog, Ratiometric Voltage |
| Output Voltage Range | 0.20 V to 4.80 V | 0.2 V to 4.8 V |
| Supply Voltage | 5.1 V typical (4.85 V to 5.35 V range) | 4.85 V to 5.35 V (5 V typ) |
| Supply Current | 6 mA typical | [DATA_NEEDED: supply current] |
| Linearity | 0.2% to 1.5% (depending on operating conditions) | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to +85 C | — |
| Package / Case | 6-SIP Module (Case 867B-04) | 6-SIP Module (Case 867-08) |
| Pressure Port | Male - 0.19" (4.93 mm) Tube | — |
| Mounting Type | Through Hole | Through-Hole |
| Termination | Solder (SIP pins) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film calibration resistors | On-chip bipolar op-amp + thin-film network |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Min Order Quantity | 200 (per NXP product page) | — |
| Min Package Quantity | 20 (Tray) | — |
| Accuracy | — | ±1.5% over 0°C to 85°C |
| Operating Temperature | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Port Type | — | Single axial port, top side |
| Media Compatibility | — | Dry air, non-corrosive gases |
| Pin Count | — | 6 |