MPX4115AS vs MPX4115A117 Comparison
Detailed side-by-side comparison of MPX4115AS by NXP Semiconductors and MPX4115A117 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPX4115AS - 15-115kPa Absolute Pressure Sensor | NXP Semiconductors
MPX4115AS ObsoleteSpecification Comparison
| Parameter | MPX4115AS | MPX4115A117 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Obsolete | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $9.95 | $10.90 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Output Type | Analog Voltage | Analog, Ratiometric Voltage |
| Output Voltage Range | 0.2 V to 4.8 V | 0.2 V to 4.8 V |
| Sensitivity | 45.9 mV/kPa (nominal at 5.1 V supply) | — |
| Supply Voltage | 4.85 V to 5.35 V (5.1 V nominal) | 4.85 V to 5.35 V (5 V typ) |
| Supply Current | [DATA_NEEDED: typical quiescent current] | [DATA_NEEDED: supply current] |
| Operating Temperature | -40C to +125C | -40 °C to +125 °C |
| Port Style | Male - 0.19 inch (4.93 mm) Tube | — |
| Package Type | 6-SIP Module (through-hole) | — |
| Mounting Type | Through Hole | Through-Hole |
| Body Length/Diameter | 17.9 mm | — |
| On-Chip Signal Conditioning | Yes (bipolar op-amp) | — |
| Temperature Compensation | Yes (on-chip) | — |
| Factory Calibration | Yes (laser-trimmed) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Accuracy | — | ±1.5% over 0°C to 85°C |
| Response Time | — | 1.0 ms (typical) |
| Package / Case | — | 6-SIP Module (Case 867-08) |
| Port Type | — | Single axial port, top side |
| Media Compatibility | — | Dry air, non-corrosive gases |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film network |
| Pin Count | — | 6 |