MPXH6300A6U vs MPXH6250A6T1 Comparison

Detailed side-by-side comparison of MPXH6300A6U by STMicroelectronics and MPXH6250A6T1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPXH6250A6T1 MPXH6250A6T1 - 20-250kPa Absolute Pressure Sensor | NXP/STMicro

MPXH6250A6T1 - 20-250kPa Absolute Pressure Sensor | NXP/STMicro

MPXH6250A6T1 ✓ Active

Specification Comparison

Parameter MPXH6300A6U MPXH6250A6T1
Brand STMicroelectronics NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $8.10 $6.55
Pressure Type Absolute Absolute
Operating Pressure Range 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI)
Output Voltage Range 0.3 V to 4.9 V 0.3 V to 4.9 V
Sensitivity 16.2 mV/kPa (typical) —
Supply Voltage 4.74 V to 5.46 V (5.0 V nominal) 4.74 V to 5.46 V (5 V typical)
Supply Current 10 mA (maximum) —
Output Type Analog voltage, ratiometric to Vcc Analog, ratiometric
Operating Temperature -40 C to +125 C —
Compensated Temperature Range 0 C to 85 C —
Accuracy +/-1.5% VFSS (typical, over compensated range) 1.5 % over 0 C to 85 C (datasheet typical)
Package 8-SOIC (0.295 inch / 7.50 mm wide body) 8-SOIC (0.295 inch / 7.50 mm width)
Mounting Type Surface Mount Surface Mount
Port Configuration Single axial port, top side —
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Technology Piezoresistive MEMS with integrated ASIC —
Response Time [DATA_NEEDED: response time] —
Pressure Hysteresis [DATA_NEEDED: pressure hysteresis value] —
RoHS Status Compliant Compliant per NXP product page
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Full-Scale Span (typical) — 4.6 V
Supply Current (typical) — 5 mA
Operating Temperature Range — [DATA_NEEDED: operating temperature range]
Port Style — Axial port (T1 suffix)
On-Chip Signal Conditioning — Yes (bipolar op-amp + thin-film trimming network)
Temperature Compensation — Yes (on-chip, calibrated)
Media Compatibility — Dry air / non-corrosive gases (T1 variant)

Datasheets & Resources

Browse All Products Create BOM Request Quote