MPXH6400AC6T1 vs MPXH6300AC6U Comparison
Detailed side-by-side comparison of MPXH6400AC6T1 by NXP Semiconductors and MPXH6300AC6U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPXH6400AC6T1 - 20-400 kPa Absolute Pressure Sensor 8-SOIC | NXP
MPXH6400AC6T1 ✓ ActiveNXP Semiconductors
MPXH6300AC6U - 20-304kPa Absolute Pressure Sensor 5V SOP-8 | NXP
MPXH6300AC6U ⚠ Last Time BuySpecification Comparison
| Parameter | MPXH6400AC6T1 | MPXH6300AC6U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Last Time Buy |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $5.25 | $7.80 |
| Pressure Type | Absolute | Absolute (vacuum-referenced) |
| Operating Pressure Range | 2.9 PSI to 58.02 PSI (20 kPa to 400 kPa) | — |
| Output Type | Analog Voltage (ratiometric) | Analog, ratiometric to VCC |
| Output Voltage Range | 0.2 V to 4.8 V (at 5 V supply) | — |
| Supply Voltage | 4.75 V to 5.25 V (5 V typical) | — |
| Port Style | Top port, male 0.13 in (3.3 mm) tube | Axial top port for 0.13 inch (3.3 mm) tube |
| Package | 8-SOIC (0.335 in, 8.50 mm width) | 8-SOIC / SSOP-8 (0.335 inch / 8.50 mm width), Top Port |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C |
| Response Time | 1000 us (1 ms typical) | — |
| Accuracy | [DATA_NEEDED: full accuracy/error band] | +/- 1.5% VFSS (0 C to 85 C) |
| Pressure Resolution | [DATA_NEEDED: ADC bits / resolution] | — |
| Calibration | On-chip, factory trimmed | — |
| Temperature Compensation | On-chip, integrated | — |
| Port Material | [DATA_NEEDED: port material spec] | — |
| MSL Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS Status | [DATA_NEEDED: RoHS compliance] | Compliant |
| Pressure Range | — | 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V (5 V typical) |
| Output Voltage Span | — | 0.3 V to 4.9 V |
| Sensitivity | — | 16.2 mV/kPa (typical) |
| On-chip Signal Conditioning | — | Yes (bipolar op amp + thin-film resistor network) |
| Compensation | — | On-chip temperature compensated and calibrated |
| Automotive Grade | — | AEC-Q100 qualified (MPXH6300A series) |