MPXHZ6400A6T1 vs MPXH6300AC6U Comparison

Detailed side-by-side comparison of MPXHZ6400A6T1 by NXP Semiconductors and MPXH6300AC6U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPXHZ6400A6T1 MPXHZ6400A6T1 - 20-400kPa Absolute Pressure Sensor | NXP

MPXHZ6400A6T1 - 20-400kPa Absolute Pressure Sensor | NXP

MPXHZ6400A6T1 ✓ Active
NXP Semiconductors
MPXH6300AC6U MPXH6300AC6U - 20-304kPa Absolute Pressure Sensor 5V SOP-8 | NXP

MPXH6300AC6U - 20-304kPa Absolute Pressure Sensor 5V SOP-8 | NXP

MPXH6300AC6U ⚠ Last Time Buy

Specification Comparison

Parameter MPXHZ6400A6T1 MPXH6300AC6U
Brand NXP Semiconductors NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Last Time Buy
Stock Status In Stock In Stock
Unit Price (USD) $5.74 $7.80
Pressure Type Absolute Absolute (vacuum-referenced)
Operating Pressure Range 20 kPa to 400 kPa (2.9 PSI to 58.02 PSI) —
Output Type Analog Voltage Analog, ratiometric to VCC
Output Voltage Range 0.2 V to 4.8 V —
Supply Voltage 4.64 V to 5.36 V (5 V nominal) —
Accuracy ±1.5% (0°C to 85°C) +/- 1.5% VFSS (0 C to 85 C)
Port Style Axial, Male - 0.13" (3.3 mm) Axial top port for 0.13 inch (3.3 mm) tube
Package 8-SSOP (Super Small Outline Package), 0.295" (7.50 mm) width 8-SOIC / SSOP-8 (0.335 inch / 8.50 mm width), Top Port
Operating Temperature -40 °C to +125 °C -40 C to +125 C
Mounting Type Surface Mount Surface Mount
Port Size 0.13 inch (3.3 mm) —
Output Type Detail Ratiometric analog voltage —
Media Compatibility Dry air, non-corrosive gases (media resistant) —
Temperature Compensation On-chip, factory calibrated —
MSL Level [DATA_NEEDED: MSL level] [DATA_NEEDED: MSL rating]
RoHS Status Compliant Compliant
Pressure Range — 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI)
Supply Voltage (VCC) — 4.75 V to 5.25 V (5 V typical)
Output Voltage Span — 0.3 V to 4.9 V
Sensitivity — 16.2 mV/kPa (typical)
On-chip Signal Conditioning — Yes (bipolar op amp + thin-film resistor network)
Compensation — On-chip temperature compensated and calibrated
Automotive Grade — AEC-Q100 qualified (MPXH6300A series)

Datasheets & Resources

Browse All Products Create BOM Request Quote