MSP430F2012TN vs MSP430F2013TN Comparison

Detailed side-by-side comparison of MSP430F2012TN by Texas Instruments and MSP430F2013TN by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
MSP430F2012TN MSP430F2012TN - 16MHz, 2KB Flash Mixed-Signal MCU | TI

MSP430F2012TN - 16MHz, 2KB Flash Mixed-Signal MCU | TI

MSP430F2012TN ✓ Active
Texas Instruments
MSP430F2013TN MSP430F2013TN - 16MHz Sensing MCU with 16-Bit ADC | TI

MSP430F2013TN - 16MHz Sensing MCU with 16-Bit ADC | TI

MSP430F2013TN ✓ Active

Specification Comparison

Parameter MSP430F2012TN MSP430F2013TN
Brand Texas Instruments Texas Instruments
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Product Type 16-bit mixed-signal microcontroller —
CPU Architecture MSP430 CPU16 16-bit RISC architecture (16-bit word)
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 2 KB 2 KB
Program Memory Organization 2K x 8 plus 256 B —
SRAM 128 B —
ADC Resolution 10 bit 16 bits
Built-In Timer 16-bit timer —
Serial Interfaces I2C and SPI —
General-Purpose I/O Pins 10 pins —
Clock Control Digitally controlled oscillator —
Low-Power Wake-Up Time Less than 1 us —
Operating Supply 2.2 V to 3.3 V —
Package 14-pin PDIP, 0.300 inch body width, 7.62 mm pitch 14-PDIP
Mounting Type Through-hole Through-hole (THT)
Temperature Grade Industrial —
RoHS Status [DATA_NEEDED: RoHS compliance status] RoHS-compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Instruction Cycle Time — 125 ns
RAM — 128 B
ADC Count — 1 ADC
ADC Architecture — Sigma-delta ADC
Universal Serial Interface — USI supporting SPI and I2C
Clock Architecture — Frequency-locked loop, FLL+
Standby Wake-Up Time — Less than 6 us
Off Mode Current — 0.1 uA with RAM retention
Operating Supply Voltage — [DATA_NEEDED: operating supply voltage range]
Active Mode Current — [DATA_NEEDED: active mode current at 1 MHz and operating voltage]
Standby Mode Current — [DATA_NEEDED: standby mode current]
Pin Count — 14 pins
Lead-Free Status — Lead-free
Green Component Status — Green electronic component
Operating Temperature Range — [DATA_NEEDED: operating temperature range]

Datasheets & Resources

Browse All Products Create BOM Request Quote