MW7IC2220GNR1 vs MW7IC2220NR1 Comparison

Detailed side-by-side comparison of MW7IC2220GNR1 by NXP Semiconductors and MW7IC2220NR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MW7IC2220GNR1 MW7IC2220GNR1 - 2W W-CDMA RF LDMOS PA 2.11-2.17 GHz | NXP

MW7IC2220GNR1 - 2W W-CDMA RF LDMOS PA 2.11-2.17 GHz | NXP

MW7IC2220GNR1 ✓ Active
NXP Semiconductors
MW7IC2220NR1 MW7IC2220NR1 - 2W W-CDMA RF LDMOS PA, 2110-2170 MHz, 28V | NXP

MW7IC2220NR1 - 2W W-CDMA RF LDMOS PA, 2110-2170 MHz, 28V | NXP

MW7IC2220NR1 ✓ Active

Specification Comparison

Parameter MW7IC2220GNR1 MW7IC2220NR1
Brand NXP Semiconductors NXP Semiconductors
Category RF Amplifiers RF Amplifiers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $25.10 $18.75
Technology RF LDMOS, two-stage integrated LDMOS (Laterally Diffused MOSFET)
Frequency Range (Usable) 2000 MHz to 2200 MHz —
Target Band W-CDMA 2110-2170 MHz —
Output Power (Avg, W-CDMA) 2 W Avg. 2 W Avg.
Operating Voltage (VDD) 28 V nominal (24 V to 32 V range) —
Gain (Typ, 2.17 GHz) 31 dB —
Quiescent Current Stage 1 (IDQ1) 80 mA —
Quiescent Current Stage 2 (IDQ2) 300 mA —
Test Signal Single-Carrier W-CDMA, PAR = 7.5 dB @ 0.01% CCDF —
ACPR Measurement 3.84 MHz channel, +/-5 MHz offset —
Package TO-270 WBL-16 Gull-Wing (16-pin plastic overmold) —
Mounting Type Surface Mount (Gull-Wing leads) Surface Mount (with bolted flange/heatsink tab)
Input/Output Matching On-chip 50 ohm matching On-chip, 50 ohm nominal
Lead-Free / RoHS RoHS compliant per NXP product page —
Operating Case Temperature [DATA_NEEDED: operating case temperature] —
Storage Temperature [DATA_NEEDED: storage temperature] —
Thermal Resistance (RthJC) [DATA_NEEDED: theta_JC] —
RF Type — W-CDMA / Wideband Integrated Power Amplifier
Frequency Range — 2000 MHz to 2200 MHz
Operating Band (W-CDMA) — 2110 MHz to 2170 MHz
Test Frequency — 2167.5 MHz
Supply Voltage (VDD) — 28 V typical
Drain Voltage Rating — 24 V to 32 V operational range
Quiescent Current (IDQ1) — 80 mA
Quiescent Current (IDQ2) — 300 mA
Small-Signal Gain — 31 dB
Stages — Two-stage integrated amplifier
Package / Case — TO-270-16 Variant, Flat Leads (TO-270WB-16)
Operating Temperature — -40C to +150C (junction)
Packaging — Tape & Reel (R1 suffix)
Modulation Formats Supported — W-CDMA, TD-SCDMA, single-carrier W-CDMA

Datasheets & Resources

Browse All Products Create BOM Request Quote