NE5532PE4 vs NE5532AD Comparison
Detailed side-by-side comparison of NE5532PE4 by Texas Instruments and NE5532AD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532PE4 - Dual 30V 10MHz Low-Noise Op Amp | Texas Instruments
NE5532PE4 ✓ ActiveSpecification Comparison
| Parameter | NE5532PE4 | NE5532AD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Operational amplifier | Dual operational amplifier |
| Number of Circuits | 2 circuits | 2 circuits |
| Architecture | Voltage-feedback | — |
| Application Category | Audio | — |
| Total Supply Voltage | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | 600 V/µs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Input Bias Current | 800 nA typical | — |
| Offset Voltage | 500 µV typical | — |
| Package | 8-DIP, 0.300 in, 7.62 mm | 8-pin SOIC |
| Mounting Type | Through-hole | Surface mount |
| RoHS Status | Yes | [DATA_NEEDED: RoHS status] |
| Lifecycle Status | Active | — |
| Supply Voltage | — | 30 V |
| Typical Unity-Gain Bandwidth | — | 10 MHz |
| High DC Voltage Gain | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with ±18 V supply |
| Gain Compensation | — | Internally compensated for unity-gain operation |
| Number of Pins | — | 8 pins |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Primary Application | — | Audio applications |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |