NE5534ADR2 vs NE5534ADRE4 Comparison
Detailed side-by-side comparison of NE5534ADR2 by onsemi and NE5534ADRE4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5534ADR2 | NE5534ADRE4 |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | General Purpose | Single general-purpose operational amplifier |
| Number of Circuits | 1 circuit | — |
| Topology | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 13 V/µs typical | 13 V/ms typical |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | 10 dB typical as shown in source snippet |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | — |
| Package | 8-SOIC, 0.154 inch width, 3.90 mm width | 8-SOIC (0.154 inch, 3.90 mm width) |
| Packaging | Tape and reel | — |
| Mounting Type | Surface mount | Surface mount |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | +3 V to +20 V |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 500 nA typical |
| Input Noise Density | — | 3.5 nV/√Hz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Swing | — | 32 V typical at VCC+ = +18 V and RL = 600 Ω |
| Total Supply Current | — | 38 mA per channel |
| Offset Nulling | — | Supported |
| External Compensation | — | Supported |
| Pin Count | — | 8 pins |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |