NE5534DR vs NE5532D Comparison
Detailed side-by-side comparison of NE5534DR by Texas Instruments and NE5532D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActiveTexas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ ActiveSpecification Comparison
| Parameter | NE5534DR | NE5532D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single low-noise operational amplifier | — |
| Manufacturer | Texas Instruments | Texas Instruments |
| Number of Circuits | 1 | — |
| Package | 8-SOIC | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface Mount |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 dB typical | 100 V/mV typical |
| Slew Rate | 13 V/us typical | 10 V/μs typical |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C for NE5532x |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Amplifier Type | — | Dual low-noise operational amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |