OPA130UA vs OPA130PA Comparison
Detailed side-by-side comparison of OPA130UA by Texas Instruments and OPA130PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
OPA130UA - 1 MHz FET-Input Op Amp, 20 pA Bias, 530 uA Iq | Texas Instruments
OPA130UA ✓ ActiveSpecification Comparison
| Parameter | OPA130UA | OPA130PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single, General Purpose, FET-Input Operational Amplifier | Single operational amplifier |
| Number of Circuits | 1 | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Slew Rate | 2 V/us | [DATA_NEEDED: slew rate] |
| Input Bias Current | 20 pA typical | 20 pA maximum |
| Quiescent Current | 530 uA typical | 530 uA typical per amplifier |
| Supply Voltage Range | +/-2.25 V to +/-18 V | 4.5 V to 36 V |
| Package | 8-pin SOIC (D), surface mount | 8-pin PDIP, 0.300 inch body width |
| Mounting Type | Surface Mount | Through-hole |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 1 mV maximum |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing / Rail-to-Rail Output | [DATA_NEEDED: output swing] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Series | OPAx130 (OPA130 / OPA2130 / OPA4130) | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | Not applicable |
| Input Topology | — | FET input |
| Open-Loop Gain | — | 120 dB minimum |
| Common-Mode Rejection Ratio | — | 90 dB minimum |
| Total Supply Voltage Range | — | 4.5 V to 36 V |
| Dual-Supply Operating Range | — | +/-18 V |
| Number of Pins | — | 8 |
| Low Offset Voltage | — | 1 mV maximum |
| High Open-Loop Gain | — | 120 dB minimum |
| Excellent Bandwidth | — | 1 MHz |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |