OPA350PA vs OPA340PA Comparison
Detailed side-by-side comparison of OPA350PA by Texas Instruments and OPA340PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
OPA350PA - 38MHz Low-Noise Rail-to-Rail Op Amp | Texas Instruments
OPA350PA ✓ ActiveSpecification Comparison
| Parameter | OPA350PA | OPA340PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single operational amplifier | Single CMOS operational amplifier |
| Architecture | CMOS operational amplifier | — |
| Supply Configuration | Single supply | Single supply |
| Supply Voltage Range | 2.7 V to 5.5 V | [DATA_NEEDED: supply voltage range] |
| Gain-Bandwidth Product | 38 MHz | 5.5 MHz |
| Slew Rate | 22 V/us | 6 V/us |
| Input Noise Voltage Density | 5 nV/sqrt(Hz) | — |
| Input Common-Mode Range | Rail-to-rail | — |
| Output Voltage Range | Rail-to-rail, within 10 mV | — |
| Total Harmonic Distortion plus Noise | 0.0006% | — |
| Number of Amplifiers | 1 | — |
| Number of Pins | 8 | — |
| Package | 8-pin PDIP, 0.300 inch (7.62 mm) pitch | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Product Category | Standard general-purpose amplifier | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of Circuits | — | 1 circuit |
| Rail-to-Rail Input | — | Yes |
| Rail-to-Rail Output | — | Yes, within 1 mV |
| Total Harmonic Distortion Plus Noise | — | 0.0007% at 1 kHz |
| Quiescent Current | — | 750 uA per channel |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Equivalent Input Noise Voltage | — | [DATA_NEEDED: equivalent input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| Pin Count | — | 8 pins |