OPA689P vs NE5532P Comparison

Detailed side-by-side comparison of OPA689P by Texas Instruments and NE5532P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
OPA689P OPA689P - 720MHz High-Gain Voltage Feedback Amp | TI

OPA689P - 720MHz High-Gain Voltage Feedback Amp | TI

OPA689P Obsolete
Texas Instruments
NE5532P NE5532P - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532P - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532P ✓ Active

Specification Comparison

Parameter OPA689P NE5532P
Brand Texas Instruments Texas Instruments
Category Amplifier ICs Amplifier ICs
Lifecycle Status Obsolete Active
Stock Status In Stock In Stock
Unit Price (USD) $2.93 $0.00
Amplifier Type Voltage Feedback Amplifier —
Number of Circuits 1 —
Output Type [DATA_NEEDED: Output Type] —
Gain Bandwidth Product 720 MHz —
-3 dB Bandwidth 280 MHz —
Slew Rate 1600 V/us 9 V/µs typical
Input Bias Current 8 uA —
Input Offset Voltage 1 mV 4000 µV maximum
Supply Current 15.8 mA —
Supply Voltage Range [DATA_NEEDED: Supply Voltage Range] ±5 V to ±15 V
Input Common-Mode Voltage Range [DATA_NEEDED: Input Common-Mode Voltage Range] —
Output Voltage Swing [DATA_NEEDED: Output Voltage Swing] —
Maximum Output Current [DATA_NEEDED: Maximum Output Current] —
Operating Temperature Range [DATA_NEEDED: Operating Temperature Range] —
Package 8-PDIP (0.300 inch, 7.62 mm) 8-pin PDIP (P)
Mounting Type Through-hole Through hole
RoHS Status [DATA_NEEDED: RoHS Status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH Status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Lifecycle Status Obsolete —
Amplifier Count — 2 amplifiers
Product Type — Dual low-noise operational amplifier
Maximum Supply Voltage — 30 V
Unity-Gain Bandwidth — 10 MHz typical
Equivalent Input Noise Voltage — 5 nV/√Hz typical at 1 kHz
Common-Mode Rejection Ratio — 100 dB typical
High DC Voltage Gain — 100 V/mV typical
Peak-to-Peak Output Voltage Swing — 32 V typical with VCC = ±18 V and RL = 600 ohm
Process Technology — Bipolar
Operating Temperature — 0 °C to 70 °C
Primary Application — Audio

Datasheets & Resources

Browse All Products Create BOM Request Quote