PCA9536DR vs PCA9534DBR Comparison

Detailed side-by-side comparison of PCA9536DR by Texas Instruments and PCA9534DBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
PCA9534DBR PCA9534DBR - 8-Bit I2C GPIO Expander | Texas Instruments

PCA9534DBR - 8-Bit I2C GPIO Expander | Texas Instruments

PCA9534DBR ✓ Active

Specification Comparison

Parameter PCA9536DR PCA9534DBR
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type 4-bit I2C/SMBus GPIO expander —
Number of GPIO Lines 4 —
Supply Voltage Range 2.3 V to 5.5 V 2.3 V to 5.5 V
I2C Bus Frequency 400 kHz 400 kHz
Interface I2C/SMBus —
Configuration Registers Present Available
CMOS Device Type 8-pin CMOS device —
Input/Output Capability General-purpose parallel input/output —
Package 8-SOIC 16-pin SSOP, 7.50 mm body
NXP Package 8-SO —
Operating Logic Levels [DATA_NEEDED: logic-level details] —
I2C Address Options [DATA_NEEDED: address-selection details] —
Input Hysteresis [DATA_NEEDED: input hysteresis] —
Output Drive Current [DATA_NEEDED: output drive current] —
Input Leakage Current [DATA_NEEDED: input leakage current] —
Output Low-Level Voltage [DATA_NEEDED: output low-level voltage] —
Output High-Level Voltage [DATA_NEEDED: output high-level voltage] —
Power-On Reset [DATA_NEEDED: power-on reset behavior] —
Maximum Supply Voltage [DATA_NEEDED: absolute maximum rating] —
Operating Temperature Range [DATA_NEEDED: operating temperature range] —
RoHS Status [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 status] —
Manufacturer Texas Instruments —
Device Type — 8-bit I2C/SMBus I/O expander
Number of GPIO Ports — 8 ports
Bus Interface — I2C/SMBus
Technology — CMOS
Operating Temperature — -40 °C to 85 °C
Mounting Type — Surface mount
Address Configuration Pins — 3 pins: A0, A1, and A2
Maximum Devices per Bus — 8 devices
Interrupt Output — Available
Internal I/O Pull-Up Resistors — Not fitted
PCF8574 Hardware Compatibility — Pin-to-pin and I2C address compatible; software changes required
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Datasheets & Resources

Browse All Products Create BOM Request Quote