PCA9554PW vs PCA9534DBR Comparison

Detailed side-by-side comparison of PCA9554PW by NXP Semiconductors and PCA9534DBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
PCA9554PW PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW ✓ Active
Texas Instruments
PCA9534DBR PCA9534DBR - 8-Bit I2C GPIO Expander | Texas Instruments

PCA9534DBR - 8-Bit I2C GPIO Expander | Texas Instruments

PCA9534DBR ✓ Active

Specification Comparison

Parameter PCA9554PW PCA9534DBR
Brand NXP Semiconductors Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type 8-bit I2C/SMBus I/O expander with interrupt —
Number of GPIO 8 bits —
Supply Voltage Range 2.3 V to 5.5 V 2.3 V to 5.5 V
I2C/SMBus Maximum Frequency 400 kHz —
I2C/SMBus Supported Frequency 100 kHz and 400 kHz —
Interface I2C-bus/SMBus —
Interrupt Support Yes —
Port Register Features Input/output and polarity configuration registers —
Pull-Up Capability Weak pull-up —
Address Difference PCA9554A has a different address —
Package 16-pin TSSOP 16-pin SSOP, 7.50 mm body
Mounting Type Surface mount Surface mount
Operating Temperature [DATA_NEEDED: Operating temperature range] -40 °C to 85 °C
Maximum Output Current per Pin [DATA_NEEDED: Maximum output current per pin] —
Input Voltage Levels [DATA_NEEDED: Input voltage thresholds] —
Output Drive Capability [DATA_NEEDED: Output drive current and output voltage characteristics] —
Standby Current [DATA_NEEDED: Standby current] —
Operating Current [DATA_NEEDED: Typical and maximum operating current] —
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Device Type — 8-bit I2C/SMBus I/O expander
Number of GPIO Ports — 8 ports
I2C Bus Frequency — 400 kHz
Bus Interface — I2C/SMBus
Technology — CMOS
Address Configuration Pins — 3 pins: A0, A1, and A2
Maximum Devices per Bus — 8 devices
Interrupt Output — Available
Configuration Registers — Available
Internal I/O Pull-Up Resistors — Not fitted
PCF8574 Hardware Compatibility — Pin-to-pin and I2C address compatible; software changes required
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Datasheets & Resources

Browse All Products Create BOM Request Quote