PCA9685PW-Q900118 vs PCA9685PW,118 Comparison

Detailed side-by-side comparison of PCA9685PW-Q900118 by NXP Semiconductors and PCA9685PW,118 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
PCA9685PW-Q900118 PCA9685PW-Q900118 - 16-Channel 12-bit I2C LED Controller | NXP

PCA9685PW-Q900118 - 16-Channel 12-bit I2C LED Controller | NXP

PCA9685PW-Q900118 ✓ Active
NXP Semiconductors
PCA9685PW,118 PCA9685PW,118 - 16-Ch 12-bit PWM LED Driver I2C | NXP

PCA9685PW,118 - 16-Ch 12-bit PWM LED Driver I2C | NXP

PCA9685PW,118 ✓ Active

Specification Comparison

Parameter PCA9685PW-Q900118 PCA9685PW,118
Brand NXP Semiconductors NXP Semiconductors
Category LED Drivers LED Drivers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $1.78 $1.99
Product Type I2C LED Driver / PWM Controller —
Number of LED Outputs 16 —
PWM Resolution 12-bit (4096 steps) 12-bit (4096 steps, 0% to 100% duty cycle)
Programmable PWM Frequency 24 Hz to 1526 Hz —
Per-Channel Sink Current (Continuous) 25 mA —
Per-Channel Sink Current (Peak) 100 mA (transient) —
Logic Supply Voltage (VDD) 2.3 V to 5.5 V —
LED Supply Voltage (V+) Up to 5.5 V (open-drain output) —
I2C Interface Standard / Fast / Fast-Mode-Plus (up to 1 MHz) —
Programmable I2C Addresses 6 selectable (A0-A5 pins), up to 62 devices per bus Up to 62 devices per bus (6 address pins)
Internal Oscillator 25 MHz (no external clock required) —
Output Enable Pin (OE) Yes, active-low —
Software Reset Yes (SWRST register) —
Operating Temperature Range -40 C to +85 C —
Package TSSOP-28 (4.4 mm body, 0.65 mm pitch) 28-TSSOP (4.40 mm body width, SOT-355-1)
Mounting Type Surface Mount Surface Mount
MSL Level [DATA_NEEDED: MSL level] [DATA_NEEDED: MSL rating]
RoHS Status Compliant Compliant
Function — 16-channel 12-bit PWM LED controller
Number of Outputs — 16
Per-Channel Output Current — 25 mA
Topology — Open-Drain / Push-Pull PWM
Interface — I2C-bus, Fast-Mode Plus (up to 1 MHz)
Supply Voltage VDD — 2.3 V to 5.5 V
Output Voltage Range (LED supply) — [DATA_NEEDED: upper LED supply voltage rating]
Internal Oscillator Frequency — 25 MHz (typical)
Output Rise/Fall Time — [DATA_NEEDED: transition time in ns]
Quiescent Current — [DATA_NEEDED: quiescent current in mA]
Operating Temperature — -40 C to +85 C
Lead-Free — Yes
Primary Application — RGBA backlighting and color mixing

Datasheets & Resources

Browse All Products Create BOM Request Quote