PCF8575PWG4 vs PCF8575PW Comparison
Detailed side-by-side comparison of PCF8575PWG4 by Texas Instruments and PCF8575PW by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | PCF8575PWG4 | PCF8575PW |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Unknown |
| Device Type | 16-bit I2C and SMBus I/O expander with interrupt | — |
| Number of I/O Ports | 16 | 16 ports |
| Port Organization | 2 ports of 8 I/O lines | — |
| Supply Voltage Range | 2.5 V to 5.5 V | — |
| I2C Maximum Clock Frequency | 400 kHz | — |
| Interface Type | I2C and SMBus | I2C/SMBus, 2-wire serial |
| Interrupt Output | Open-drain active-low | Open-drain |
| Address Configuration | 3 hardware address inputs | — |
| Power-On Port State | All I/O lines high | — |
| I/O Architecture | Quasi-bidirectional input/output | — |
| Standby Current | 10 uA maximum | — |
| Package | 24-TSSOP, 4.40 mm body width | 24-pin TSSOP (PW) |
| Number of Terminals | 24 | — |
| Mounting Type | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Lead-Free / Green | Yes | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance statement] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Standard I/O Pin Drive Current | [DATA_NEEDED: per-pin output sink and source current ratings] | — |
| Operating Temperature Range | [DATA_NEEDED: exact operating temperature range for PCF8575PWG4] | [DATA_NEEDED: operating temperature range] |
| Operating Supply Voltage Range | — | 2.5 V to 5.5 V |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Hardware Address Inputs | — | 3 inputs, supporting up to 8 devices |
| Maximum Standby Current | — | 10 µA |
| Output Port Configuration | — | 16 individually latched ports |
| Output Drive Capability | — | High-current LED drive capability |
| High-Level Output Drive | — | Current source to VCC |
| Microcontroller Compatibility | — | Compatible with most microcontrollers |
| Maximum Output Current per Port | — | [DATA_NEEDED: output current per port] |