PCM1794DB vs PCM1798DB Comparison
Detailed side-by-side comparison of PCM1794DB by Texas Instruments and PCM1798DB by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | PCM1794DB | PCM1798DB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Unknown | Active |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| Data Resolution | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | — |
| DAC Architecture | Advanced segment DAC | — |
| Output Configuration | Balanced current outputs | — |
| Digital Audio Interface | I2S, PCM, and left-justified | — |
| Digital Input Tolerance | 5 V tolerant | — |
| Supply Condition for Electrical Characteristics | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V | — |
| Reference Test Condition | TA = 25 degrees C | — |
| Reference System Clock | 256 fS | — |
| Reference Sampling Rate | 44.1 kHz | — |
| Package | 28-lead SSOP | 28-lead SSOP |
| Process Technology | CMOS | CMOS |
| Initialization Requirement | 1024 system clock periods after reset | — |
| Dynamic Range | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo | 123 dB |
| THD+N | 0.0004% typical | 0.0005% |
| Clock Jitter Tolerance | Improved tolerance; exact value not stated | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Architecture | — | Advanced segment DAC |
| Resolution | — | 24 bit |
| Maximum Sampling Frequency | — | 200 kHz |
| Nominal Audio Sampling Frequency | — | 192 kHz |
| Output Type | — | Differential current output |
| Differential Output Current | — | 4 mAp-p |
| Digital Filter Oversampling | — | 8 times |
| Digital Filter Stop-Band Attenuation | — | -98 dB |
| Digital Filter Pass-Band Ripple | — | ±0.0002 dB |
| Supported Sampling Frequency Range | — | 10 kHz to 200 kHz |
| Supported System Clock Ratios | — | 128fS, 192fS, 256fS, 384fS, 512fS, or 768fS with autodetect |
| Mounting Type | — | Surface mount |
| Pin Compatibility | — | Compatible with PCM1794 pin assignment |