SN65HVD06D vs SN65HVD82D Comparison
Detailed side-by-side comparison of SN65HVD06D by Texas Instruments and SN65HVD82D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD06D | SN65HVD82D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Data Rate | 10 Mbps | 250 kbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Supply Voltage | 4.5 V to 5.5 V | 5 V |
| Operating Temperature | -40C to +85C | -40 C to +85 C |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | — |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 1 (unlimited) | — |
| RoHS Status | Compliant | — |
| Product Type | — | RS-422/RS-485 half-duplex transceiver |
| Interface Standard | — | RS-422/RS-485 |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Package Pin Count | — | 8 pins |
| ESD Protection | — | IEC ESD protection |
| ESD Model Coverage | — | Human-Body Model, Air-Gap Discharge, and Contact Discharge |
| Transceiver Configuration | — | 1/1 transceiver |
| Operating Mode | — | Half Duplex |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |