SN65HVD230DR vs DS90LV018ATM Comparison
Detailed side-by-side comparison of SN65HVD230DR by Texas Instruments and DS90LV018ATM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD230DR | DS90LV018ATM |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | CAN Bus Transceiver | LVDS single differential line receiver |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| Supply Voltage | 3 V to 3.6 V (3.3 V nominal) | 3 V |
| Maximum Data Rate | 1 Mbps | Greater than 400 Mbps |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Operating Temperature | -40C to +85C | — |
| Package | 8-SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| RS Pin Function | Slew-rate control via external resistor | — |
| Logic Family | — | CMOS |
| Maximum Clock Frequency | — | 200 MHz |
| Typical Differential Input Voltage | — | 350 mV |
| Output Logic Level | — | 3 V CMOS |
| Propagation Delay | — | 1.5 ns |
| Quiescent Current | — | 9 mA |
| Operating Temperature Range | — | -40 °C to +85 °C |
| Fail-Safe Input Support | — | Open, shorted, and 100 Ω terminated inputs |
| Fail-Safe Output State | — | HIGH |
| PCB Layout Style | — | Flow-through |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |