SN65HVD230DR vs MCP2551-E-SN Comparison
Detailed side-by-side comparison of SN65HVD230DR by Texas Instruments and MCP2551-E-SN by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveMicrochip Technology
MCP2551-E/SN - High-Speed CAN Transceiver 1Mbps SOIC-8 | Microchip
MCP2551-E-SN ✓ ActiveSpecification Comparison
| Parameter | SN65HVD230DR | MCP2551-E-SN |
|---|---|---|
| Brand | Texas Instruments | Microchip Technology |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.94 | $0.98 |
| Product Type | CAN Bus Transceiver | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | CANbus (ISO 11898-2) | ISO-11898 (CAN, CAN-FD ready) |
| Supply Voltage | 3 V to 3.6 V (3.3 V nominal) | — |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Operating Temperature | -40C to +85C | — |
| Package | 8-SOIC (D) | 8-SOIC (SN), 3.90 mm body width |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| RS Pin Function | Slew-rate control via external resistor | — |
| Function | — | CAN Transceiver |
| Data Rate | — | 1 Mbps |
| Supply Voltage (VCC) | — | 4.5 V to 5.5 V |
| Supply Current (Normal Mode, Recessive) | — | 10 mA typical |
| Supply Current (Standby Mode) | — | [DATA_NEEDED: standby supply current] |
| Bus Fault Voltage (CANH, CANL) | — | -40 V to +40 V |
| Load Dump Voltage | — | ISO-7637 compliant |
| Operating Temperature Range | — | -40 C to +125 C (E = Extended) |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM ESD rating] |
| MSL Level | — | 1 |