SN65HVD230DR vs TJA1044T Comparison

Detailed side-by-side comparison of SN65HVD230DR by Texas Instruments and TJA1044T by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
TJA1044T TJA1044T - 1 Mbit/s CAN Transceiver with Standby | NXP | SO-8

TJA1044T - 1 Mbit/s CAN Transceiver with Standby | NXP | SO-8

TJA1044T ✓ Active

Specification Comparison

Parameter SN65HVD230DR TJA1044T
Brand Texas Instruments NXP Semiconductors
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type CAN Bus Transceiver High-speed CAN transceiver with standby mode
Number of Drivers/Receivers 1/1 —
Protocol CANbus (ISO 11898-2) —
Supply Voltage 3 V to 3.6 V (3.3 V nominal) [DATA_NEEDED: VCC operating range]
Maximum Data Rate 1 Mbps 1 Mbit/s
Driver/Receiver Configuration Half-Duplex —
Standby Mode Supply Current 370 uA typical —
ESD Protection (Bus Pins, HBM) Exceeds 16 kV —
Maximum Nodes on Bus 120 nodes —
Receiver Common-Mode Range -2 V to 7 V —
Operating Temperature -40C to +85C —
Package 8-SOIC (D) 8-pin SO (SOIC-8), surface mount
Mounting Type Surface Mount Surface Mount
RoHS Status Compliant [DATA_NEEDED: RoHS status]
RS Pin Function Slew-rate control via external resistor —
Bus / Protocol — CAN (Controller Area Network), 2-wire differential bus
Product Family — Mantis high-speed CAN transceiver family
Transceiver Type — 1/1 transceiver (TXD and RXD), half CANbus
I/O Reference Voltage (VIO) — [DATA_NEEDED: VIO operating range]
Sleep Mode Current — Low current consumption in sleep mode (exact value [DATA_NEEDED: sleep current in uA])
Standby Control — Dedicated standby (STB) pin
Automotive Qualification — [DATA_NEEDED: AEC-Q100 grade]
Operating Temperature Range — [DATA_NEEDED: temperature range in C]
ESD / Transient Immunity — [DATA_NEEDED: IEC 61000-4-2 ESD rating]
Common-Mode Range — [DATA_NEEDED: bus common-mode range in V]
Termination — External 60 ohm termination at bus ends (application requirement)
Unit Price Reference — $0.2548 as of 2026-10-28 (LCSC listing)
Distributor Stock Reference — $0.872 unit price as of 2026-10-28 (ADatasheet listing)

Datasheets & Resources

Browse All Products Create BOM Request Quote