SN65HVD78D vs SN65HVD06D Comparison
Detailed side-by-side comparison of SN65HVD78D by Texas Instruments and SN65HVD06D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD78D | SN65HVD06D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | USB Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | — | In Stock |
| Unit Price (USD) | — | $0.74 |
| Product Type | 3.3 V half-duplex RS-485 transceiver | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Signaling Rate | 50 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Bus Standard | RS-485 | — |
| Package | 8-pin SOIC | 8-pin SOIC (D) |
| Operating Temperature Range | -40°C to +125°C | — |
| Mounting Type | Surface mount | Surface Mount |
| ESD Protection | Human Body Model and IEC Contact Discharge on bus pins | — |
| IEC Contact Discharge Protection | ±12 kV | — |
| Fault Protection Voltage | -13 V to +16.5 V | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Function | — | Transceiver |
| Protocol | — | RS422, RS485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Data Rate | — | 10 Mbps |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Supply Voltage | — | 4.5 V to 5.5 V |
| Operating Temperature | — | -40C to +85C |
| Minimum Differential Output Voltage | — | 2.5 V into 54 ohm load |
| Bus-Pin ESD Protection (HBM) | — | 16 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Failsafe | — | Open, short, and idle-bus |
| Standards Compliance | — | ANSI TIA/EIA-485-A, ISO 8482E |
| MSL Level | — | 1 (unlimited) |