SP232ECT-L vs SP3232ECN-L Comparison
Detailed side-by-side comparison of SP232ECT-L by MaxLinear and SP3232ECN-L by MaxLinear. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | SP232ECT-L | SP3232ECN-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Device Type | 2/2 full RS-232 transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply | 5 V | — |
| Protocol | RS-232 | — |
| Standard Compatibility | RS-232D and ITU V.28 | — |
| ESD Protection | +/-15 kV | — |
| Operating Temperature | 0 C to +70 C | — |
| Package | 16-SOIC (SOIC16W) | 16-pin narrow SOIC |
| Package Body Width | 7.50 mm | — |
| Package Length | 10.3 mm | — |
| Mounting Type | Surface Mount | Surface Mount |
| Packaging | Tape and Reel | — |
| Internal Technology | CMOS | — |
| RoHS | Yes | — |
| External Capacitors | [DATA_NEEDED: external capacitor requirement] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 120 kbps |
| Driver Output Level | [DATA_NEEDED: driver output levels] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Product Type | — | RS-232 transceiver |
| Channel Configuration | — | 2 transmit and 2 receive |
| Single Supply Voltage Range | — | 3 V to 5.5 V |
| Charge-Pump Capacitor Requirement | — | 0.1 uF in 3.3 V operation |
| ESD Protection, IEC 61000-4-2 | — | plus or minus 15 kV |
| ESD Protection, Human Body Model | — | plus or minus 15 kV |
| Operating Temperature Range | — | 0 C to 70 C |
| Logic Compatibility | — | TTL-compatible transceiver |
| RS-232 Standard | — | EIA/TIA-232 |
| RoHS Status | — | RoHS compliant |
| Charge-Pump Architecture | — | High-efficiency internal charge pump |
| Automatic Driver Shutdown | — | [DATA_NEEDED: automatic driver shutdown behavior] |
| Maximum Driver Output Voltage | — | [DATA_NEEDED: maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |