SP3232ECN-L vs SP232ECT-L Comparison
Detailed side-by-side comparison of SP3232ECN-L by MaxLinear and SP232ECT-L by MaxLinear. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | SP3232ECN-L | SP232ECT-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | RS-232 transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Channel Configuration | 2 transmit and 2 receive | — |
| Maximum Data Rate | 120 kbps | [DATA_NEEDED: maximum data rate] |
| Single Supply Voltage Range | 3 V to 5.5 V | — |
| Charge-Pump Capacitor Requirement | 0.1 uF in 3.3 V operation | — |
| ESD Protection, IEC 61000-4-2 | plus or minus 15 kV | — |
| ESD Protection, Human Body Model | plus or minus 15 kV | — |
| Operating Temperature Range | 0 C to 70 C | — |
| Package | 16-pin narrow SOIC | 16-SOIC (SOIC16W) |
| Mounting Type | Surface Mount | Surface Mount |
| Logic Compatibility | TTL-compatible transceiver | — |
| RS-232 Standard | EIA/TIA-232 | — |
| RoHS Status | RoHS compliant | — |
| Charge-Pump Architecture | High-efficiency internal charge pump | — |
| Automatic Driver Shutdown | [DATA_NEEDED: automatic driver shutdown behavior] | — |
| Maximum Driver Output Voltage | [DATA_NEEDED: maximum driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| ESD Protection | — | +/-15 kV |
| Operating Temperature | — | 0 C to +70 C |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |