SP485EMN-L vs SP485EN-L Comparison
Detailed side-by-side comparison of SP485EMN-L by MaxLinear and SP485EN-L by MaxLinear. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | SP485EMN-L | SP485EN-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Half-duplex RS-422/RS-485 transceiver | Half-duplex differential transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75V to 5.25V |
| Maximum Data Rate | 10,000 kbps | 5 Mbps |
| Operating Temperature Range | -40°C to +125°C | -40°C to +85°C |
| Package | 8-pin SOIC | 8-pin SOIC |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Process Technology | BiCMOS | BiCMOS |
| ESD Tolerance, Human Body Model | More than ±15 kV | — |
| ESD Tolerance, IEC 61000-4-2 Air Discharge | More than ±15 kV | — |
| Mounting Type | Surface-mount SOIC-8 | Surface mount |
| Operating Mode | Low-power operation | — |
| RoHS Status | Compliant | unknown |
| Automotive Qualification | Not qualified | — |
| Supply Connection | 5 V | — |
| Package Body Width | 4.9 mm | — |
| Interface Standards | — | RS-422 and RS-485 |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Receiver Input Type | — | Differential Schmitt-trigger input |
| Package Width | — | 3.9 mm |
| Package Length | — | 4.9 mm |
| Transceiver Count per Package | — | 1 |
| Supply Decoupling Requirement | — | [DATA_NEEDED: recommended decoupling capacitor value and ESR] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: receiver and driver propagation delay] |
| Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Shutdown Function | — | [DATA_NEEDED: shutdown or power-save support] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |