SP485EN-L vs MAX485EESA+ Comparison
Detailed side-by-side comparison of SP485EN-L by MaxLinear and MAX485EESA+ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActiveSpecification Comparison
| Parameter | SP485EN-L | MAX485EESA+ |
|---|---|---|
| Brand | MaxLinear | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $1.42 |
| Product Type | Half-duplex differential transceiver | RS-485/RS-422 Transceiver |
| Interface Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75V to 5.25V | — |
| Nominal Supply Voltage | 5 V | — |
| Operating Temperature Range | -40°C to +85°C | -40 °C to +85 °C |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Receiver Input Type | Differential Schmitt-trigger input | — |
| Process Technology | BiCMOS | — |
| Package | 8-pin SOIC | — |
| Package Width | 3.9 mm | — |
| Package Length | 4.9 mm | — |
| Mounting Type | Surface mount | Surface Mount |
| Transceiver Count per Package | 1 | — |
| Supply Decoupling Requirement | [DATA_NEEDED: recommended decoupling capacitor value and ESR] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: receiver and driver propagation delay] | — |
| Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Shutdown Function | [DATA_NEEDED: shutdown or power-save support] | — |
| RoHS Status | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Data Rate | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Package / Case | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| MSL Level | — | 1 (Unlimited) |