SP485R vs ADM485ARZ-REEL Comparison
Detailed side-by-side comparison of SP485R by MaxLinear and ADM485ARZ-REEL by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ ActiveSpecification Comparison
| Parameter | SP485R | ADM485ARZ-REEL |
|---|---|---|
| Brand | MaxLinear | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.46 | $1.62 |
| Function | Transceiver | — |
| Protocol | RS-485 | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | [DATA_NEEDED: receiver hysteresis] |
| Data Rate | 5 Mbps | 5 Mbps (max) |
| Supply Voltage | 4.75 V to 5.25 V | 5 V (single supply) |
| Operating Temperature | [DATA_NEEDED: operating temperature range C] | — |
| Receiver Input Impedance (RIN) | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) | — |
| Bus Loading | 1/10 unit load (supports 400+ transceivers on bus) | — |
| Input Sensitivity | +/-200 mV | — |
| Common-Mode Input Voltage Range | -7 V to +12 V | — |
| Shutdown Mode | Yes | — |
| Package | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP | SOIC-8 (SO-8) / SO-8 |
| Mounting Type | Surface Mount (SOIC) / Through-Hole (PDIP) | Surface Mount |
| Pin-to-Pin Equivalent | SP485 (with higher RIN) | — |
| RoHS Status | [DATA_NEEDED: rohs status] | Compliant |
| Type | — | Transceiver |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Operating Temperature Range | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| REACH Status | — | Unaffected |
| MSL Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |