STM32F401VCH6 vs TM4C1232H6PMI7 Comparison
Detailed side-by-side comparison of STM32F401VCH6 by STMicroelectronics and TM4C1232H6PMI7 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F401VCH6 - ARM Cortex-M4 84MHz 256KB Flash MCU | STMicroelectronics
STM32F401VCH6 ✓ ActiveTexas Instruments
TM4C1232H6PMI7 - Tiva C ARM Cortex-M4F MCU 80MHz 256KB | Texas Instruments
TM4C1232H6PMI7 ✓ ActiveSpecification Comparison
| Parameter | STM32F401VCH6 | TM4C1232H6PMI7 |
|---|---|---|
| Brand | STMicroelectronics | Texas Instruments |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.74 | $6.40 |
| Core Architecture | ARM Cortex-M4 with FPU (single-precision) | ARM Cortex-M4F (32-bit) |
| Maximum Clock Frequency | 84 MHz | 80 MHz |
| Performance | 105 DMIPS / 1.25 DMIPS/MHz / 273 CoreMark | — |
| Flash Memory | 256 KB (256K x 8) | — |
| SRAM | 64 KB | 32 KB |
| Supply Voltage Range | 1.7 V to 3.6 V | — |
| Operating Temperature | -40 °C to +85 °C | -40 C to +85 C (industrial, "I7" grade) |
| GPIO Count | 81 | [DATA_NEEDED: total GPIO count per datasheet pin list] |
| Package | 100-ball UFBGA (7x7 mm, 0.5 mm pitch) | 64-pin LQFP (PM) 10x10 mm |
| ADC | 1 x 12-bit, 2.4 MSPS, up to 16 channels | 2 x 12-bit, 1 MSPS |
| Timers | 11 (1x 32-bit, 7x 16-bit general, 2x watchdog, 1x SysTick) | — |
| Communication Interfaces | USB OTG FS, 3x USART, 4x SPI, 3x I2C, 2x I2S, 1x SDIO | — |
| DMA | 16-channel DMA controller | — |
| RTC | Yes, with calendar and 20 backup registers | — |
| RoHS Status | Compliant | Compliant (lead-free) |
| MSL Level | 3 | MSL3 (per JEDEC J-STD-020, reflow 260 C peak) |
| Mounting Type | Surface Mount | Surface Mount |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Floating Point Unit | — | Single-precision FPU (IEEE 754) |
| Program Memory (Flash) | — | 256 KB (256K x 8) |
| Operating Voltage (VDD) | — | 3.15 V to 3.63 V |
| CAN Controllers | — | 1 x CAN 2.0 A/B |
| USB Interface | — | USB 2.0 Full-Speed Device (USB-D), no Host/OTG |
| I2C Controllers | — | 2 |
| SSI/SPI Controllers | — | 4 |
| UART Controllers | — | [DATA_NEEDED: UART count] |
| PWM Outputs | — | [DATA_NEEDED: enhanced PWM module count] |
| DMA Engine | — | MicroDMA (uDMA) with scatter-gather |
| Debug Interface | — | JTAG and SWD (Serial Wire Debug) |
| Hibernation Module | — | Yes (RTC + battery domain) |