STM32F429VGT6 vs STM32F429VIT6 Comparison
Detailed side-by-side comparison of STM32F429VGT6 by STMicroelectronics and STM32F429VIT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActiveSTMicroelectronics
STM32F429VIT6 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics
STM32F429VIT6 UnknownSpecification Comparison
| Parameter | STM32F429VGT6 | STM32F429VIT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Unknown |
| Core | ARM Cortex-M4 with FPU and DSP instructions | ARM Cortex-M4 with FPU |
| CPU Maximum Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 1 MB | 2 MB |
| SRAM | 192 KB (including 4 KB backup SRAM) | — |
| Operating Voltage | 1.8 V to 3.6 V | — |
| Package | LQFP-100 (14 x 14 mm) | 100-pin LQFP, 14 x 14 mm |
| Mounting Type | Surface Mount | Surface mount |
| Operating Temperature | -40 C to +85 C (grade 6) | [DATA_NEEDED: operating temperature range] |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| MPU | Yes (memory protection unit) | — |
| LCD-TFT Controller | Yes, up to XGA resolution | — |
| DMA2D (Chrom-ART) | Yes | — |
| USB OTG | HS + FS (with on-chip PHY) | — |
| Ethernet MAC | 10/100 with IEEE 1588v2 | — |
| CAN Controllers | 2 x CAN 2.0B active | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | — |
| DAC | 2 x 12-bit | — |
| Timers | 17 (including 12 x 16-bit, 2 x 32-bit) | — |
| GPIOs | Up to 82 fast GPIOs | — |
| Crypto/Hash Accelerator | AES-128/192/256, SHA-1, MD5, 3DES | — |
| SDMMC | 1 x SDMMC host | — |
| Communication Peripherals | UART, SPI, I2C, SAI, SPDIF-Rx | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| MSL Level | 3 (168 hours) | — |
| Product Type | — | 32-bit ARM Cortex-M4 microcontroller |
| Maximum CPU Frequency | — | 180 MHz |
| Flash Organization | — | 2M x 8 bits |
| System SRAM | — | 256 KB |
| Backup SRAM | — | 4 KB |
| Performance | — | 225 DMIPS |
| Performance per Frequency | — | 1.25 DMIPS/MHz |
| Architecture | — | 32-bit RISC |
| Floating-Point Support | — | Single-precision FPU |
| DSP Instructions | — | Supported |
| Memory Protection Unit | — | Supported |
| Flash Accelerator | — | ART Accelerator, zero-wait-state execution |
| Nominal Supply | — | 2.5 V or 3.3 V |
| LCD Interface | — | Parallel LCD interface |
| REACH Status | — | [DATA_NEEDED: REACH status] |