STM32F429VGT6TR vs STM32F439IGT6 Comparison
Detailed side-by-side comparison of STM32F429VGT6TR by STMicroelectronics and STM32F439IGT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F429VGT6TR - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST
STM32F429VGT6TR ✓ ActiveSTMicroelectronics
STM32F439IGT6 - 180MHz ARM MCU 1MB Flash LQFP-176 | STMicroelectronics
STM32F439IGT6 ✓ ActiveSpecification Comparison
| Parameter | STM32F429VGT6TR | STM32F439IGT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.85 | $8.40 |
| Core | ARM Cortex-M4 with FPU and DSP instructions | — |
| CPU Maximum Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 1 MB | — |
| SRAM | 192 KB (including 4 KB backup SRAM) | 256 KB |
| Operating Voltage | 1.8 V to 3.6 V | — |
| Package | LQFP-100 (14 x 14 mm) | 176-LQFP (24 x 24 mm) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 C to +85 C (grade 6) | -40 C to +85 C |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| MPU | Yes (memory protection unit) | — |
| LCD-TFT Controller | Yes, up to XGA resolution | — |
| DMA2D (Chrom-ART) | Yes | — |
| USB OTG | HS + FS (with on-chip PHY) | — |
| Ethernet MAC | 10/100 with IEEE 1588v2 | — |
| CAN Controllers | 2 x CAN 2.0B active | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Timers | 17 (including 12 x 16-bit, 2 x 32-bit) | Up to 17 (general-purpose, advanced-control, basic, low-power, SysTick, watchdog) |
| GPIOs | Up to 82 fast GPIOs | — |
| Crypto/Hash Accelerator | AES-128/192/256, SHA-1, MD5, 3DES | — |
| SDMMC | 1 x SDMMC host | — |
| Communication Peripherals | UART, SPI, I2C, SAI, SPDIF-Rx | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | 3 (168 hours) | [DATA_NEEDED: MSL rating] |
| Core Architecture | — | ARM Cortex-M4 with FPU and DSP instructions |
| Maximum Clock Frequency | — | 180 MHz |
| DMIPS | — | 225 DMIPS / 1.25 DMIPS/MHz |
| Program Memory (Flash) | — | 1 MB (1M x 8) |
| Backup SRAM | — | 4 KB |
| EEPROM (Emulated) | — | [DATA_NEEDED: emulated EEPROM capacity] |
| Operating Voltage (VDD) | — | 1.8 V to 3.6 V |
| Communication Interfaces | — | USB 2.0 OTG FS+HS, CAN 2.0B (bxCAN x2), USART/UART x6, SPI x3, I2C x3, Ethernet MAC 10/100, SDIO x2 |
| Graphics Peripherals | — | TFT LCD controller (up to XGA), Chrom-ART Accelerator, 8-14-bit camera I/F |
| External Memory Controller | — | FSMC for SRAM/PSDRAM/NOR/NAND/Compact Flash |
| Crypto / Hash Accelerator | — | AES-256, TDES, SHA-1/MD5/SHA-256, TRNG |
| Pin Count | — | 176 |
| Pitch | — | 0.5 mm |
| I/O Count | — | [DATA_NEEDED: GPIO count] |