STM32F429ZET6TR vs STM32F429VGT6 Comparison
Detailed side-by-side comparison of STM32F429ZET6TR by STMicroelectronics and STM32F429VGT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F429ZET6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics (Tape & Reel)
STM32F429ZET6TR ✓ ActiveSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActiveSpecification Comparison
| Parameter | STM32F429ZET6TR | STM32F429VGT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| CPU Core | ARM Cortex-M4 with FPU and DSP instructions | — |
| Maximum Frequency | 180 MHz | — |
| Flash Memory | 512 KB | 1 MB |
| System SRAM | 256 KB | — |
| Backup SRAM | 4 KB | — |
| Memory Architecture | 32-bit | — |
| Package | 144-LQFP (20 mm x 20 mm) | LQFP-100 (14 x 14 mm) |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| GPIO | [DATA_NEEDED: GPIO count] | — |
| ART Accelerator | 0-wait-state execution from Flash memory | Yes (0-wait-state Flash execution) |
| MPU | Available according to retrieved manufacturer-feature data | Yes (memory protection unit) |
| DSP Instructions | Available | — |
| Floating-Point Unit | Integrated in ARM Cortex-M4 core | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| I2C | 3-channel profile identified in retrieved component data | — |
| Ethernet Support | [DATA_NEEDED: exact Ethernet peripheral configuration] | — |
| USB Support | [DATA_NEEDED: exact USB peripheral configuration] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Core | — | ARM Cortex-M4 with FPU and DSP instructions |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Mounting Type | — | Surface Mount |
| Operating Temperature | — | -40 C to +85 C (grade 6) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| MSL Level | — | 3 (168 hours) |