STM32F750N8H6 vs STM32F746IGT6 Comparison
Detailed side-by-side comparison of STM32F750N8H6 by STMicroelectronics and STM32F746IGT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics
STM32F750N8H6 ✓ Active
Specification Comparison
| Parameter | STM32F750N8H6 | STM32F746IGT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $7.10 | $13.76 |
| Core Architecture | Arm Cortex-M7 32-bit RISC | ARM Cortex-M7 32-bit RISC |
| Maximum CPU Frequency | 216 MHz | — |
| DMIPS Performance | 462 DMIPS | — |
| Flash Memory | 64 KB | — |
| Total SRAM | 340 KB (320 + 16 + 4 KB) | — |
| FPU | Single-precision + double-precision hardware FPU | Double-precision IEEE 754 |
| DSP Instructions | Yes (SIMD, MAC) | — |
| Operating Voltage | 1.8 V to 3.6 V | — |
| Supply Current Max | [DATA_NEEDED: maximum supply current] | — |
| Package | TFBGA-216 (H6) | 176-pin LQFP (24x24 mm, 0.5 mm pitch) |
| Mounting Type | Surface Mount | — |
| Operating Temperature | -40C to +85C | — |
| USB Interface | OTG Full-Speed + High-Speed (dedicated PHY) | — |
| CAN | 2 x CAN 2.0B | — |
| LCD-TFT Controller | Yes (dedicated pixel clock) | — |
| Camera Interface | Yes (8- to 14-bit parallel) | 8- to 14-bit parallel, up to 54 MB/s |
| ADC Resolution | 12-bit, up to 2.4 MSPS | — |
| DAC | 2 x 12-bit | 2x 12-bit |
| ART Accelerator | Yes (zero-wait-state Flash execution) | — |
| MSL Level | [DATA_NEEDED: moisture sensitivity level] | — |
| RoHS Status | Compliant | Compliant |
| Maximum Clock Frequency | — | 216 MHz |
| L1 Cache | — | 16 KB I-cache + 16 KB D-cache |
| Program Memory | — | 1 MB Flash |
| SRAM | — | 340 KB total (256 KB SRAM1/SRAM2 + 64 KB CCM SRAM + 16 KB DTCM-RAM + 4 KB backup SRAM) |
| Supply Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Operating Temperature Range | — | -40 C to +85 C (industrial grade -6 suffix) |
| ADC | — | 3x 12-bit, 2.4 MSPS, 24 channels |
| Communication Interfaces | — | USB OTG FS+HS, 10/100 Ethernet MAC, 3x CAN 2.0B, 6x USART/UART, 6x SPI, 3x I2C, 2x SDMMC, 1x CAN, 1x SPDIF-RX |
| Display Controller | — | LCD-TFT controller up to XGA resolution with Chrom-ART accelerator |
| Crypto Hardware | — | AES-128/192/256, Triple-DES, SHA-1/MD5, TRNG |
| Timers | — | 12x 16-bit, 2x 32-bit |
| DMA | — | 2x DMA controllers, 16 streams total |
| GPIO | — | Up to 140 I/O |