STM32F767IIT6 vs STM32F777IIK6 Comparison
Detailed side-by-side comparison of STM32F767IIT6 by STMicroelectronics and STM32F777IIK6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ ActiveSTMicroelectronics
STM32F777IIK6 - 216MHz Cortex-M7 MCU 2MB Flash UFBGA-176 | STMicroelectronics
STM32F777IIK6 ✓ ActiveSpecification Comparison
| Parameter | STM32F767IIT6 | STM32F777IIK6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $11.95 | $16.12 |
| Core | ARM Cortex-M7 32-bit RISC with FPU | — |
| Maximum Clock Frequency | 216 MHz | — |
| DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) | — |
| DSP Instructions | Yes (single-precision SIMD) | — |
| L1 Cache | 16 KB I-cache + 16 KB D-cache | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| Flash Memory | 2 MB | — |
| SRAM | 512 KB | — |
| Package | 176-pin LQFP (24x24 mm) | 176+25 UFBGA (10x10 mm) |
| Supply Voltage (VDD) | 1.7 V to 3.6 V | — |
| Operating Temperature | -40 C to +85 C | — |
| USB | 2x USB OTG (FS + HS with on-chip PHY) | USB OTG HS + USB OTG FS (with embedded PHY) |
| CAN | 2x CAN 2.0B | Three CAN 2.0B controllers |
| Ethernet | 10/100 MAC (MII/RMII) | 10/100 MAC (IEEE 1588) |
| SDMMC | 2x SDMMC | Two SDMMC interfaces |
| SPI / I2S | 6x SPI (2 with I2S) | — |
| I2C | 3x I2C | — |
| USART/UART | 4x USART + 2x UART | — |
| ADC | 3x 12-bit, up to 2.4 MSPS | Two 12-bit, up to 2.4 MSPS each |
| DAC | 2x 12-bit | Two 12-bit |
| Timers | 12x 16-bit + 2x 32-bit | Up to 18 (13x 16-bit + 2x 32-bit + low-power + watchdog + SysTick) |
| Crypto/Hash | AES-128/192/256, SHA-1/2, MD5, HMAC | AES-128/192/256, SHA-1/SHA-256, TRNG |
| Graphics | TFT LCD controller, JPEG codec, Chrom-ART DMA2D | — |
| Mounting Type | Surface Mount | Surface Mount (BGA) |
| MSL Level | 3 (168 hours) | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS Status | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M7 with FPU + DSP |
| CPU Frequency | — | 216 MHz max |
| DMIPS Performance | — | 462 DMIPS |
| Instruction Cache | — | 16 KB I-cache, 16 KB D-cache |
| Program Flash | — | 2 MB dual-bank |
| SRAM Total | — | 512 KB + 16 KB + 4 KB backup |
| Operating Voltage | — | 1.7 V to 3.6 V |
| Temperature Range | — | [DATA_NEEDED: industrial operating temperature range] |
| Display Interface | — | TFT-LCD controller + MIPI-DSI |
| Quad-SPI | — | Dual-mode Quad-SPI (one) for external Flash/PSRAM |
| External Memory Bus | — | SDRAM, NAND, NOR (8/16/32-bit) |