STM32L053R8T6 vs MKL33Z256VLH4557 Comparison

Detailed side-by-side comparison of STM32L053R8T6 by STMicroelectronics and MKL33Z256VLH4557 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Active
NXP Semiconductors
MKL33Z256VLH4557 MKL33Z256VLH4557 - Kinetis KL33 256KB Cortex-M0+ MCU | NXP

MKL33Z256VLH4557 - Kinetis KL33 256KB Cortex-M0+ MCU | NXP

MKL33Z256VLH4557 ✓ Active

Specification Comparison

Parameter STM32L053R8T6 MKL33Z256VLH4557
Brand STMicroelectronics NXP Semiconductors
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $2.10 $3.87
Core Processor ARM Cortex-M0+ —
Core Architecture 32-bit —
Maximum CPU Frequency 32 MHz —
Flash Memory Size 64 KB (64K x 8) —
SRAM Size 8 KB [DATA_NEEDED: SRAM size for this die variant]
Supply Voltage Range 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR) —
Operating Temperature Range -40 C to +125 C -40 C to +105 C
Package / Case 64-LQFP (10x10 mm) —
Number of Pins 64 —
Mounting Type Surface Mount Surface Mount
USB Controller USB 2.0 full-speed crystal-less device —
ADC 12-bit with hardware oversampling up to 16-bit resolution 12-bit SAR
DAC 12-bit —
Comparators 2 ultra-low-power comparators —
LCD Driver Up to 8x28 segments —
Communication Interfaces I2C, SPI, USART —
Run Mode Current 84 uA/MHz (typical) —
Standby Current with RTC 0.29 uA (typical) —
Number of GPIOs [DATA_NEEDED: Number of GPIOs] —
RoHS Compliant —
Series — Kinetis KL33
Core — ARM Cortex-M0+
Maximum Clock Frequency — 48 MHz
Program Flash Memory — 256 KB
Operating Voltage Range — [DATA_NEEDED: VDD min/max]
Package — LQFP-64 (10x10 mm, 0.5 mm pitch)
Segment LCD Controller — Integrated (up to 8x36 / 4x40 segments)
Number of I/O Pins — [DATA_NEEDED: GPIO count]
Peripherals — UART, SPI, I2C, ADC, LCD, LPTMR, RTC, DMA
Low-Power Modes — VLPR, STOP, VLLS0-3, LLS
MSL Level — [DATA_NEEDED: MSL rating]
RoHS Status — Compliant

Datasheets & Resources

Browse All Products Create BOM Request Quote